Question 1

A Ø30 f7 fit symbol designates ____.

Accepted Answer

A)   a dimension for a hole
B)   a Ø30 hole
C)   a dimension for a shaft
D)   a hole designed for a high precision fitE) C) and D)
F) A) and D)

Question 2

Refer to Appendix Table 25 in your textbook. In a force fit with a 20mm basic diameter, the maximum hole size would be ____ mm.

Accepted Answer

A)   19.967
B)   20.000
C)   19.946
D)   19.987E) C) and D)
F) B) and C) A

Question 3

Grade 14 would be suitable for specifying a tolerance requirement for a pressing or rolling operation.

Accepted Answer

A) True 
 B)False

Question 4

Refer to Appendix Table 24 in your textbook. In a sliding fit with a 32mm basic diameter, the maximum hole size would be ____.

Accepted Answer

A)   32.000
B)   32.021
C)   31.993
D)   31.980E) A) and D)
F) B) and C)

Question 5

Grades 1 through 8 are very precise grades.

Accepted Answer

A) True 
 B)False

Question 6

When using tolerance position letters, capital letters are used for external dimensions, and lowercase letters for internal dimensions.

Accepted Answer

A) True 
 B)False

Question 7

Refer to Appendix Table 23 in your textbook. An F8/h7 symbol would be used to specify a ____ fit.

Accepted Answer

A)   close running
B)   sliding
C)   loose running
D)   forceE) None of the above
F) B) and C)

Question 8

In the tolerance zone symbol H8, the H stands for a(n) ____________________ dimension.

Accepted Answer

internal

Question 9

For metric fits, the ___________________________________ establishes the magnitude of the tolerance zone or the amount of part size variation allowed for both internal and external dimensions.

Accepted Answer

International Tolerance Guide

Question 10

Grade 9 would be suitable for specifying a tolerance requirement for a milling operation.

Accepted Answer

A) True 
 B)False

Question 11

In the metric system of limits and fits, the grade number and the tolerance zone are inversely proportioned.

Accepted Answer

A) True 
 B)False

Question 12

In the hole basis fit system, the basic size is the ____________________ size of the hole.

Accepted Answer

The answer of In the hole basis fit system, the...

Question 13

The fit symbol includes the fit(s) and the _________________________.

Accepted Answer

The answer of The fit symbol includes the fit(s) and...

Question 14

Refer to Appendix Table 24 in your textbook. In a loose running fit with a 10mm basic diameter, the minimum hole size would be ____.

Accepted Answer

A)   10.090
B)   9.920
C)   9.830
D)   10.000E) A) and B)
F) A) and C)

Question 15

A Ø30 H8/f7 fit symbol designates _________________________ basis.

Accepted Answer

The answer of A Ø30 H8/f7 fit symbol designates _________________________...

Exam 15: Metric Fits

A Ø30 f7 fit symbol designates ____.

Correct Answer
verified

Refer to Appendix Table 25 in your textbook. In a force fit with a 20mm basic diameter, the maximum hole size would be ____ mm.

Correct Answer
verified
A

Grade 14 would be suitable for specifying a tolerance requirement for a pressing or rolling operation.

Correct Answer
verified

Refer to Appendix Table 24 in your textbook. In a sliding fit with a 32mm basic diameter, the maximum hole size would be ____.

Correct Answer
verified

Grades 1 through 8 are very precise grades.

Correct Answer
verified

When using tolerance position letters, capital letters are used for external dimensions, and lowercase letters for internal dimensions.

Correct Answer
verified

Refer to Appendix Table 23 in your textbook. An F8/h7 symbol would be used to specify a ____ fit.

Correct Answer
verified

In the tolerance zone symbol H8, the H stands for a(n) ____________________ dimension.

Correct Answer
verified
internal

For metric fits, the ___________________________________ establishes the magnitude of the tolerance zone or the amount of part size variation allowed for both internal and external dimensions.

Correct Answer
verified
International Tolerance Guide

Grade 9 would be suitable for specifying a tolerance requirement for a milling operation.

Correct Answer
verified

In the metric system of limits and fits, the grade number and the tolerance zone are inversely proportioned.

Correct Answer
verified

In the hole basis fit system, the basic size is the ____________________ size of the hole.

Correct Answer
verified

The fit symbol includes the fit(s) and the _________________________.

Correct Answer
verified

Refer to Appendix Table 24 in your textbook. In a loose running fit with a 10mm basic diameter, the minimum hole size would be ____.

Correct Answer
verified

A Ø30 H8/f7 fit symbol designates _________________________ basis.

Correct Answer
verified

Exam 15: Metric Fits

A Ø30 f7 fit symbol designates ____.

Correct AnswerverifiedShow Answer

Refer to Appendix Table 25 in your textbook. In a force fit with a 20mm basic diameter, the maximum hole size would be ____ mm.

Correct AnswerverifiedA

Grade 14 would be suitable for specifying a tolerance requirement for a pressing or rolling operation.

Correct AnswerverifiedShow Answer

Refer to Appendix Table 24 in your textbook. In a sliding fit with a 32mm basic diameter, the maximum hole size would be ____.

Correct AnswerverifiedShow Answer

Grades 1 through 8 are very precise grades.

Correct AnswerverifiedShow Answer

When using tolerance position letters, capital letters are used for external dimensions, and lowercase letters for internal dimensions.

Correct AnswerverifiedShow Answer

Refer to Appendix Table 23 in your textbook. An F8/h7 symbol would be used to specify a ____ fit.

Correct AnswerverifiedShow Answer

In the tolerance zone symbol H8, the H stands for a(n) ____________________ dimension.

Correct Answerverifiedinternal

For metric fits, the ___________________________________ establishes the magnitude of the tolerance zone or the amount of part size variation allowed for both internal and external dimensions.

Correct AnswerverifiedInternational Tolerance Guide

Grade 9 would be suitable for specifying a tolerance requirement for a milling operation.

Correct AnswerverifiedShow Answer

In the metric system of limits and fits, the grade number and the tolerance zone are inversely proportioned.

Correct AnswerverifiedShow Answer

In the hole basis fit system, the basic size is the ____________________ size of the hole.

Correct AnswerverifiedShow Answer

The fit symbol includes the fit(s) and the _________________________.

Correct AnswerverifiedShow Answer

Refer to Appendix Table 24 in your textbook. In a loose running fit with a 10mm basic diameter, the minimum hole size would be ____.

Correct AnswerverifiedShow Answer

A Ø30 H8/f7 fit symbol designates _________________________ basis.

Correct AnswerverifiedShow Answer

Correct Answer
verified

Correct Answer
verified
A

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
internal

Correct Answer
verified
International Tolerance Guide

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified