Filters
Question type
Study Flashcards

Refer to the exhibit. Refer to the exhibit. What change on Core-1 will result in a successful ping to 10.1.1.254 from the management interface? A) Use the command ping 10.1.1.254 vrf mgmt Use the command ping 10.1.1.254 vrf mgmt B) Use the command ping 10.1.1.254/24 ping 10.1.1.254/24 C) Change the Core-1 management address to 10.1.1.1/25 first Change the Core-1 management address to 10.1.1.1/25 first D) The destination 10.1.1.254 requires configuring a static route The destination 10.1.1.254 requires configuring a static route What change on Core-1 will result in a successful ping to 10.1.1.254 from the management interface?


A) Use the command ping 10.1.1.254 vrf mgmt Use the command ping 10.1.1.254 vrf mgmt
B) Use the command ping 10.1.1.254/24 ping 10.1.1.254/24
C) Change the Core-1 management address to 10.1.1.1/25 first Change the Core-1 management address to 10.1.1.1/25 first
D) The destination 10.1.1.254 requires configuring a static route The destination 10.1.1.254 requires configuring a static route

E) None of the above
F) B) and D)

Correct Answer

verifed

verified

A

What are two mechanisms supported on AOS-CX 6300 switches used in Multi-active Detection to determine the status of the Primary member? (Choose two.)


A) Management interface split detection
B) Peer switch-based detection
C) Loopback keepalives
D) ARP-based
E) BFD

F) None of the above
G) A) and D)

Correct Answer

verifed

verified

Refer to the exhibit. Refer to the exhibit. What configuration is needed in order for show LLDP configuration to show this output? A) none; LLDP is enabled by default on Aruba switches B) configuring LLDP both globally and on the interfaces C) enabling LLDP on the interfaces only D) configuring LLDP globally only What configuration is needed in order for "show LLDP configuration" to show this output?


A) none; LLDP is enabled by default on Aruba switches
B) configuring LLDP both globally and on the interfaces
C) enabling LLDP on the interfaces only
D) configuring LLDP globally only

E) All of the above
F) B) and C)

Correct Answer

verifed

verified

What are two methods for remotely managing an Aruba AOS-CX switch? (Choose two.)


A) SNMPv2c
B) HTTPS
C) USB-C console
D) Telnet
E) SSH

F) A) and D)
G) C) and D)

Correct Answer

verifed

verified

ServiceOS login: admin SVOS> password Enter password: ******** Confirm password: The login password to access an Aruba AOS-CX was lost. After connecting to the switch console port, a reboot is performed and the Service OS console is accessed as shown above. What is the default password that is required for the admin account while under the Service OS console?


A) No password is set for this account.
B) "password"
C) "forgetme!"
D) The same login password that has lost originally.

E) B) and D)
F) B) and C)

Correct Answer

verifed

verified

Refer to the exhibit. Refer to the exhibit. The above command was applied to an Aruba AOS-CX 6300M 24-port switch with 4-port SFP56 uplinks. All ports are set as access switchports. Which ports carry VLAN 1 traffic? A) 1/1/8, 1/1/10, 1/1/5-1/1/24 B) 1/1/1-1/1/28 C) 1/1/1-1/1/24 D) 1/1/8-1/1/10, 1/1/5-1/1/28 The above command was applied to an Aruba AOS-CX 6300M 24-port switch with 4-port SFP56 uplinks. All ports are set as access switchports. Which ports carry VLAN 1 traffic?


A) 1/1/8, 1/1/10, 1/1/5-1/1/24
B) 1/1/1-1/1/28
C) 1/1/1-1/1/24
D) 1/1/8-1/1/10, 1/1/5-1/1/28

E) A) and D)
F) B) and D)

Correct Answer

verifed

verified

What command displays information regarding the secondary image installed on an AOS-CX switch?


A) show secondary
B) show version detail
C) show version
D) show images

E) All of the above
F) B) and C)

Correct Answer

verifed

verified

Which command can be used to find the serial number of an Aruba OS-CX switch?


A) The command inventory The command inventory
B) The command version version
C) The command show running-configuration show running-configuration
D) The command show system show system

E) B) and C)
F) A) and D)

Correct Answer

verifed

verified

Refer to the exhibit. Refer to the exhibit. Using the static IP address configured above, what is the converted binary value of the third octet assigned to the local interface? A) 11010101 B) 10110001 C) 01001011 D) 11111000 Using the static IP address configured above, what is the converted binary value of the third octet assigned to the local interface?


A) 11010101
B) 10110001
C) 01001011
D) 11111000

E) A) and D)
F) A) and C)

Correct Answer

verifed

verified

Which two types of routes can be found in the IP routing table of an Aruba AOS-CX switch? (Choose two.)


A) Local
B) EIGRP
C) BGP
D) ISIS
E) RIPng

F) B) and E)
G) C) and D)

Correct Answer

verifed

verified

Which two port characteristics must match between LAG interfaces? (Choose two.)


A) Port number
B) Duplex
C) Member ID
D) Media type
E) Chassis number

F) C) and D)
G) B) and E)

Correct Answer

verifed

verified

Which port or ports should be allowed through a firewall so that an AOS-CX switch can act as an SNMP Agent?


A) UDP 1812 and UDP 1813
B) UDP 161
C) TCP 443
D) UDP 162

E) All of the above
F) None of the above

Correct Answer

verifed

verified

Refer to the exhibit. Refer to the exhibit. LLDP The command show LLDP neighbor-info gets typed into Access-1. All switches are Aruba OS-CX switches. What is the output of this command? A) B) C) D) LLDP The command show LLDP neighbor-info gets typed into Access-1. All switches are Aruba OS-CX switches. What is the output of this command?


A) Refer to the exhibit. LLDP The command show LLDP neighbor-info gets typed into Access-1. All switches are Aruba OS-CX switches. What is the output of this command? A) B) C) D)
B) Refer to the exhibit. LLDP The command show LLDP neighbor-info gets typed into Access-1. All switches are Aruba OS-CX switches. What is the output of this command? A) B) C) D)
C) Refer to the exhibit. LLDP The command show LLDP neighbor-info gets typed into Access-1. All switches are Aruba OS-CX switches. What is the output of this command? A) B) C) D)
D) Refer to the exhibit. LLDP The command show LLDP neighbor-info gets typed into Access-1. All switches are Aruba OS-CX switches. What is the output of this command? A) B) C) D)

E) All of the above
F) None of the above

Correct Answer

verifed

verified

What is the binary conversion of the hexadecimal value 0x2001?


A) 0010 0001
B) 0002 0000 0000 0001
C) 0011 0000 0000 0001
D) 0010 0000 0000 0001

E) None of the above
F) All of the above

Correct Answer

verifed

verified

What are the commands to disable SSH and HTTPS services from the default VRF?


A) Core-1(config) # no ssh server Core-1(config) # no https-server
B) Core-1# no ssh server vrf default Core-1# no https-server vrf default
C) Core-1(config) # no ssh server enable Core-1(config) # no https-server enable
D) Core-1(config) # no ssh server vrf default Core-1(config) # no https-server vrf default

E) B) and C)
F) A) and B)

Correct Answer

verifed

verified

Refer to the exhibit Refer to the exhibit What is true regarding VLAN 50 according to the diagram above? A) VLAN 50 is part of a switched virtual interface (SVI) that was never routed causing it to be down. B) Since VLAN 50 has not been assigned to any enabled physical port, the status is down. C) VLAN 50 is assigned only to Trunk ports which is why no ports are listed under interfaces. D) VLAN 50 was never added to the vlan-database and therefore is in a down state. What is true regarding VLAN 50 according to the diagram above?


A) VLAN 50 is part of a switched virtual interface (SVI) that was never routed causing it to be down.
B) Since VLAN 50 has not been assigned to any enabled physical port, the status is down.
C) VLAN 50 is assigned only to Trunk ports which is why no ports are listed under interfaces.
D) VLAN 50 was never added to the vlan-database and therefore is in a down state.

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

What are two primary concerns regarding layer two loops in a redundant topology? (Choose two.)


A) routing loops
B) costs associated with upgrading from copper to fiber
C) multiple frame copies leading to instability of the MAC address table
D) security issues with a redundant loop indicating to hackers that a back-door exists
E) broadcast storms

F) C) and D)
G) B) and C)

Correct Answer

verifed

verified

C,D

Your customer has 349 users in a two-story building. What are two benefits of a 2-Tier design? (Choose two.)


A) Layer 2 and Layer 3 protocols run close to the endpoints to better implement ACL and QoS policy at the edge.
B) Improved performance by offloading processing from the Access layer to the Core.
C) Use of layer 2 switches at the access layer can process and route traffic from attached APs.
D) Support for WAN/MPLS, Internet, and Data Center directly on the Collapsed core.
E) Provides a more cost effective solution given that no additional switches are required for a third tier.

F) B) and D)
G) All of the above

Correct Answer

verifed

verified

A,E

What are the benefits of a 3-Tier design over a 2-Tier? (Choose two.)


A) Offloading processing from the Core without routing at the Access layer.
B) Can use lower speed links between Core to Aggregation and Aggregation to Access given the use of an Aggregation layer.
C) Lowering the cost of a deployment due to needing less switches overall.
D) Better scalability in a campus with a large number of buildings.
E) Gaining the flexibility to connect the Data-Center to any Access layer switch.

F) D) and E)
G) A) and B)

Correct Answer

verifed

verified

Which two commands will save the running-config so that changes will be loaded automatically on the next reboot? (Choose two.)


A) write memory
B) save
C) copy config config1 config startup-config
D) copy running-config startup-config
E) copy running-config checkpoint boot-config

F) A) and B)
G) B) and D)

Correct Answer

verifed

verified

Showing 1 - 20 of 34

Related Exams

Exam 1

Designing Multi-Site HPE Storage Solutions

148 Questions

Exam 2

HPE Storage Solutions

94 Questions

Exam 3

Configuring HPE GreenLake Solutions

95 Questions

Exam 4

Architecting Advanced HPE Server Solutions

92 Questions

Exam 5

Designing HPE Server Solutions

83 Questions

Exam 6

Delta - Designing HPE Server Solutions

123 Questions

Exam 7

Designing HPE Hybrid IT Solutions

80 Questions

Exam 8

Implementing HPE Composable Infrastructure Solutions

25 Questions

Exam 9

Designing HPE Software-Defined Infrastructure Solutions

43 Questions

Exam 10

Building HPE Hybrid IT Solutions

71 Questions

Exam 11

Designing HPE Nimble Solutions

78 Questions

Exam 12

Using HPE OneView

54 Questions

Exam 13

Selling Aruba Products and Solutions

36 Questions

Exam 14

Designing Aruba Solutions

14 Questions

Exam 15

Aruba Certified Design Associate

34 Questions

Exam 16

Aruba Certified ClearPass Professional (ACCP) V6.7

40 Questions

Exam 17

Aruba Certified Mobility Associate Exam

72 Questions

Exam 18

Aruba Certified Mobility Professional Exam

23 Questions

Exam 19

Aruba Certified Switching Associate

98 Questions

Exam 21

Aruba Certified Mobility Expert Written Exam

32 Questions

Exam 22

HPE Sales Certified - Aruba Products and Solutions

36 Questions

Show Answer