Question 1

Match each item with a statement below.
-Provides connection-oriented communication that is reliable (lost packets are retransmitted)

Accepted Answer

A)  Internet Packet Exchange (IPX) protocol
B)  SSCP
C)  NCP
D)  IPX/SPX protocol suite
E)  Sequenced Packet Exchange (SPX) protocolF) C) and E)
G) C) and D)

Question 2

The Transport Control field is initially set to ____ by the transmitting station and is incremented each time the IPX packet passes through a router.

Accepted Answer

A)  0
B)  5
C)  17
D)  20E) C) and D)
F) A) and D)

Question 3

The first part of a DECnet Phase V address is called the ____.

Accepted Answer

A)  source part
B)  initial domain part
C)  initial source part
D)  initial interface partE) A) and B)
F) All of the above

Question 4

The DECnet protocols are based on a network architecture that is referred to as the ____.

Accepted Answer

A)  Digital Network Architecture
B)  Digital Network Infrastructure
C)  Digital Network Alliance
D)  Digital Network AlignmentE) A) and B)
F) B) and C)

Question 5

The ____________________ suite of protocols was created by Digital Equipment Corporation (DEC)in 1974 to connect DEC minicomputers together.

Accepted Answer

The answer of The ____________________ suite of protocols was created...

Question 6

The communication between two NAUs is called a(n)____________________.

Accepted Answer

The answer of The communication between two NAUs is called...

Question 7

____________________ is used to synchronize both ends of the SPX connection to achieve maximum throughput.

Accepted Answer

The answer of ____________________ is used to synchronize both ends...

Question 8

Match each item with a statement below.
-Used to enable communication between two host computers and control point to control point is used to provide communication between two APPN applications

Accepted Answer

A)  Internet Packet Exchange (IPX) protocol
B)  SSCP
C)  NCP
D)  IPX/SPX protocol suite
E)  Sequenced Packet Exchange (SPX) protocolF) D) and E)
G) C) and D)

Question 9

List and describe the two segments of the SNA protocol stack.

Accepted Answer

The SNA protocol stack is divided into t...

Question 10

A(n) ____ unit is used to access the programs run by the end user.

Accepted Answer

A)  physical
B)  interpreted
C)  logical
D)  virtualE) C) and D)
F) A) and C)

Exam 9: Ipxspx, Appletalk, and Other Network Protocols

List and describe the two segments of the SNA protocol stack.

Correct Answer
verified
The SNA protocol stack is divided into t...
View Answer

The communication between two NAUs is called a(n)____________________.

Correct Answer
verified

A(n) ____ unit is used to access the programs run by the end user.

Correct Answer
verified

____________________ is used to synchronize both ends of the SPX connection to achieve maximum throughput.

Correct Answer
verified

The first part of a DECnet Phase V address is called the ____.

Correct Answer
verified

Match each item with a statement below. -Used to enable communication between two host computers and control point to control point is used to provide communication between two APPN applications

Correct Answer
verified

Match each item with a statement below. -Provides connection-oriented communication that is reliable (lost packets are retransmitted)

Correct Answer
verified

The ____________________ suite of protocols was created by Digital Equipment Corporation (DEC)in 1974 to connect DEC minicomputers together.

Correct Answer
verified

The DECnet protocols are based on a network architecture that is referred to as the ____.

Correct Answer
verified

The Transport Control field is initially set to ____ by the transmitting station and is incremented each time the IPX packet passes through a router.

Correct Answer
verified

Exam 9: Ipxspx, Appletalk, and Other Network Protocols

List and describe the two segments of the SNA protocol stack.

Correct AnswerverifiedThe SNA protocol stack is divided into t...View AnswerShow Answer

The communication between two NAUs is called a(n)____________________.

Correct AnswerverifiedShow Answer

A(n) ____ unit is used to access the programs run by the end user.

Correct AnswerverifiedShow Answer

____________________ is used to synchronize both ends of the SPX connection to achieve maximum throughput.

Correct AnswerverifiedShow Answer

The first part of a DECnet Phase V address is called the ____.

Correct AnswerverifiedShow Answer

Match each item with a statement below. -Used to enable communication between two host computers and control point to control point is used to provide communication between two APPN applications

Correct AnswerverifiedShow Answer

Match each item with a statement below. -Provides connection-oriented communication that is reliable (lost packets are retransmitted)

Correct AnswerverifiedShow Answer

The ____________________ suite of protocols was created by Digital Equipment Corporation (DEC)in 1974 to connect DEC minicomputers together.

Correct AnswerverifiedShow Answer

The DECnet protocols are based on a network architecture that is referred to as the ____.

Correct AnswerverifiedShow Answer

The Transport Control field is initially set to ____ by the transmitting station and is incremented each time the IPX packet passes through a router.

Correct AnswerverifiedShow Answer

Correct Answer
verified
The SNA protocol stack is divided into t...
View Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified